Call to Get a Quote!
UHMW-10A – UHMW Polyethylene Tapes
10 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape w/aggressive acrylic adhesive wound on a blue poly liner.
*SOLD BY THE CASE ONLY*
Additional Information
UHMW-10A – UHMW Polyethylene Tapes
Is a 36 yard, 10 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape with an aggressive acrylic adhesive wound on a 2.8 mil white paper liner. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties.
Outwears Teflon™ and is a good replacement when high temperature resistance is not a requirement
Used primarily in automotive and mechanical applications
Applications:
- Rub strips on conveyors
- Bearings and sliding surfaces
- Chutes and hopper liners
- Dead plates
- Wear pads
- Guide rails
- Furniture and drawer slides
Physical Properties:
- Backing Thickness: 10.0 mil
- Total Tape Thickness (w/o liner): 12 mil
- Peel Adhesion: 55 oz/in
- Tensile Strength: 60 lb/in
- Elongation: 300%
- Maximum Operating Temperature: 225°F
- White Paper Liner
- 3″ Plastic Core
- 36 Yard Rolls
Alternative to: Dewal #423-10; 3M #5423; Lamart #150-10; Venture #968; St. Gobain #2300-10R; Taconic #6311-10; Specialty Tape #S884; Lanmar #622-10R
