Categories

Call to Get a Quote!

UMHW-15A – UHMW Polyethylene Tapes

15 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape w/aggressive acrylic adhesive wound on a blue poly liner.

*SOLD BY THE CASE ONLY*

Add to Quote

Additional Information

UMHW-15A – UHMW Polyethylene Tapes

Is a 18 yard, 15 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape with an aggressive acrylic adhesive wound on a blue poly liner. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties.

Outwears Teflon™ and is a good replacement when high temperature resistance is not a requirement

Used primarily in automotive and mechanical applications

Meets the following automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M

Applications:

  • Rub strips on conveyors
  • Bearings and sliding surfaces
  • Chutes and hopper liners
  • Dead plates
  • Wear pads
  • Guide rails
  • Furniture and drawer slides

Physical Properties:

  • Backing Thickness: 15.0 mil
  • Total Tape Thickness (w/o liner): 17.3mil
  • Peel Adhesion: 60 oz/in
  • Tensile Strength: 60 lb/in
  • Elongation: 300%
  • Maximum Operating Temperature: 200°F
  • 3″ Plastic Core
  • 18 Yard Rolls

Alternative to: Dewal #423-15; St. Gobain #2302-15; Taconic #6311-15