Call to Get a Quote!
UHMW-20A – UHMW Polyethylene Tapes
20 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape w/aggressive acrylic adhesive wound on a blue poly liner.
*SOLD BY THE CASE ONLY*
Additional Information
UHMW-20A – UHMW Polyethylene Tapes
Is an 18 yard, 20 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape with an aggressive acrylic adhesive wound
on a blue poly liner. Its high chemical and abrasion resistance and extremely low coefficient of friction makes
this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties.
Outwears Teflon™ and is a good replacement when high temperature resistance is not a requirement
Used primarily in automotive and mechanical applications
Applications:
- Rub strips on conveyors
- Bearings and sliding surfaces
- Chutes and hopper liners
- Dead plates
- Wear pads
- Guide rails
- Furniture and drawer slides
Physical Properties:
- Backing Thickness: 20.0 mil
- Total Tape Thickness (w/o liner): 21.8 mil
- Peel Adhesion: 60 oz/in
- Tensile Strength: 60 lb/in
- Elongation: 300%
- Maximum Operating Temperature: 200°F
- 3″ Plastic Core
- 18 Yard Rolls
Alternative to: Dewal #423-20; St. Gobain #2302-20R; Taconic #6311-20; Lanmar #622-20R
