Call to Get a Quote!
UMHW-15A – UHMW Polyethylene Tapes
15 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape w/aggressive acrylic adhesive wound on a blue poly liner.
*SOLD BY THE CASE ONLY*
Additional Information
UMHW-15A – UHMW Polyethylene Tapes
Is a 18 yard, 15 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape with an aggressive acrylic adhesive wound on a blue poly liner. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties.
Outwears Teflon™ and is a good replacement when high temperature resistance is not a requirement
Used primarily in automotive and mechanical applications
Meets the following automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M
Applications:
- Rub strips on conveyors
- Bearings and sliding surfaces
- Chutes and hopper liners
- Dead plates
- Wear pads
- Guide rails
- Furniture and drawer slides
Physical Properties:
- Backing Thickness: 15.0 mil
- Total Tape Thickness (w/o liner): 17.3mil
- Peel Adhesion: 60 oz/in
- Tensile Strength: 60 lb/in
- Elongation: 300%
- Maximum Operating Temperature: 200°F
- 3″ Plastic Core
- 18 Yard Rolls
Alternative to: Dewal #423-15; St. Gobain #2302-15; Taconic #6311-15