Categories

Call to Get a Quote!

UMHW-5A – UHMW Polyethylene Tapes

5 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape w/aggressive acrylic adhesive wound on a blue poly liner.

*SOLD BY THE CASE ONLY*

Add to Quote

Additional Information

UMHW-5A – UHMW Polyethylene Tapes

Is a 36 yard, 5 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape with an aggressive acrylic adhesive wound on a 2.8 mil white paper liner. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties.

Outwears Teflon™ and is a good replacement when high temperature resistance is not a requirement

Used primarily in automotive and mechanical applications

Applications:

  • Rub strips on conveyors
  • Bearings and sliding surfaces
  • Chutes and hopper liners
  • Dead plates
  • Wear pads
  • Guide rails
  • Furniture and drawer slides

Physical Properties:

  • Backing Thickness: 5.0 mil
  • Total Tape Thickness (w/o liner): 7.0 mil
  • Peel Adhesion: 45 oz/in
  • Tensile Strength: 40 lb/in
  • Elongation: 350%
  • Maximum Operating Temperature: 225°F
  • White Paper Liner
  • 3″ Plastic Core
  • 36 Yard Rolls

Alternative to: Dewal #423-5FW; 3M #5430; Lamart #150-5; Venture #967; St. Gobain #2302-5R;
Specialty Tape #S882; Taconic #6311-05; Lanmar #622-5R